Harbor Breeze PLM52CB5D Manual De Instrucciones página 12

FINAL INSTALLATION
Remove three screws from fitter plate on
6.
underside of motor housing (D). Connect male
plug from motor housing (D) to female plug from
switch housing (E). (Fig. 6) Make sure plugs
connect tightly.
Align holes in switch housing (E) with holes in
7.
fitter plate. Re-insert screws that were removed in
the previous step and tighten all screws securely.
(Fig. 7)
8.
Attach pull chain extension (O) supplied in
one of the hardware packs or custom pull
chain extension (sold separately) to fan pull
chain. (Fig. 8)
NOTE: This fan is remote control adaptable
(remote control sold separately). Any remote
control used with this fan MUST be
UL-approved for DAMP LOCATIONS.
6
Fitter
Plate
Male Plug
E
7
Fitter
Plate
E
8
E
O
D
Female
Plug
D
D