Setting up the answering machine (continued)
Tip
All the mailbox buttons ((MAILBOX 1), (MAILBOX 2), and (MAILBOX 3)) work as
the (PLAY/STOP) button; press any of the three in this case.
To hear the current time
Press (TIME/SET). The current time setting is announced.
Recording the greeting
You can record your own greeting for the "normal" and
"announcement only" modes (page 33).
(ERASE)
MIC
Notes
• If you do not record your own greeting, a prerecorded greeting will be
assigned automatically (see page 27).
• If your greeting is less than two seconds, the greeting is not recorded. A
prerecorded greeting will be assigned automatically.
• If a call comes in during recording, recording stops automatically.
• If 90 seconds have passed or the memory becomes full in step 3, recording
stops automatically.
• "Memory full" is announced if no recording space is available when you
press (REC/MEMO). Erase unnecessary messages (see page 32).
Tip
To record a greeting for the "announcement only" mode, select the
announcement only mode first (see page 33), then follow the instructions above.
Otherwise, the normal greeting will be recorded.
EN
26
Answering Machine Features
1
Press (MENU) repeatedly until
"Set out-going message" is
announced.
"- -" blinks on the display.
2
Press (REC/MEMO).
"Now recording" is announced
and a long beep sounds.
3
Speak into the base phone
microphone (MIC). The display
starts counting. You can record
up to 90 seconds.
4
To stop recording, press
(PLAY/STOP).
Your greeting replays
automatically.