Service Information - Stiebel Eltron DCE 3-1 Trend Manual De Funcionamiento E Instalacion

OPERATION

Service information

Mounting the water heater
1 Flat gasket
2 Filter screen with sealed edge
Mark the 4 drill holes, referencing the positioning on the
water heater rear cover.
Drill the holes and secure the water heater using suitable
fixing materials (screws and wall anchors are not part of the
standard delivery): Countersunk screw, Ø 4.5 mm, max. di-
ameter of screw-head 9 mm.
Secure the DHW connection pipe with a flat gasket and the
cold water inlet line with the sealed-edge filter screen (from
the accessories) to the twin connectors.
Seal the openings on the factory-installed water connections
using the plugs from the accessories.
14 | DCE Trend
1 2
13. Service information
Connection overview/component overview
1
2
1 Flow meter
2 High limit safety cut-out, automatic reset
3 Pin strips for connected load and temperature setting
4 Diagnostic lights
www.stiebeleltronamericas.com
3
4