SEVERIN PG 8539 Instrucciones De Uso página 15

Ocultar thumbs Ver también para PG 8539:
Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 29
Grilling
∙ The grill pan must be filled with water up
to the 'Max' marking.
∙ Height-adjustable models:
When cooking delicate foods, the
rack should be adjusted to its highest
position.
∙ Insert the plug into a suitable earthed
power-outlet.
∙ Thermostat-controlled models:
Turn the thermostat control knob
clockwise all the way. The indicator light
comes on, and the heating element is
permanently switched on.
∙ After approximately 10 minutes, the
heating element reaches the right
temperature for grilling.
∙ The grill can also be used to keep the
food warm: by turning the thermostat
control back, the intervals between the
heating element switching on and off
can be reduced to a minimum.
∙ Caution: To prevent a possible build-
up of heat and subsequent damage to
the appliance, the food to be cooked
must be placed directly onto the grill
rack. Do not place any objects (e.g.
aluminium foil, barbecue plates or
other items) between the food and
the heating element.
∙ As the water in the grill pan evaporates
during grilling, it must be topped up
in good time. When adding water,
ensure that the water does not come
into contact with the heating element.
Caution: Disconnect the grill from the
mains before adding water.
∙ Once the grilling process is finished:
∙ Set the thermostat control knob back to
'l'.
∙ Remove the plug from the power outlet
and allow the grill to cool down.
Cleaning and care
∙ Ensure that the grill is thoroughly
cleaned after use.
∙ Before cleaning the grill, ensure it is
disconnected from the power supply and
has completely cooled down.
∙ Do not use metallic pads or abrasive
cleaning agents.
∙ Remove the grill rack and clean it in a
dish-washer or with warm soapy water.
To remove persistent food residues, it
can be left soaking for a while.
∙ The heating element can be removed
for cleaning. To avoid the risk of electric
shock, do not clean the heating element
with water and do not immerse it in
water. The junction box may be wiped
with a slightly damp lint-free cloth.
∙ All other parts can be cleaned with a
cloth soaked in soapy water, and should
be wiped completely dry afterwards.
Disposal
Devices marked with this symbol
must be disposed of separately
from your household waste, as
they contain valuable materials
which can be recycled. Proper disposal
protects the environment and human
health. Your local authority or retailer can
provide information on the matter.
15

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

Pg 8549Pg 8550Pg 8551

Tabla de contenido