Honeywell THP2400A1027 Serie Guia De Instalacion página 4

THP2400A1027 COVER PLATE ASSEMBLY
Mount Cover Plate to a Horizontal 2 in. X 4 in. Electrical Box (See Fig. 4)
1. Pull the wires through the wire hole on the cover plate and wall plate. Position the cover plate and wall plate on
the electrical box with the arrows pointing up.
2. Insert two #6-32 X 5/8 flat head screws. Check leveling, if desired, and tighten the flat head screws.
Fig. 4. Mount cover plate, wall plate and thermostat to a horizontal 2 in. X 4 in. electrical box.
Automation and Control Solutions
Honeywell International Inc.
1985 Douglas Drive North
Golden Valley, MN 55422
customer.honeywell.com
ELECTRICAL BOX
WIRE
® U.S. Registered Trademark
© 2012 Honeywell International Inc.
69-2759EFS—01
Printed in United States
COVER PLATE
WIRE HOLE
MOUNTING HOLES (2)
WALL PLATE
M.S. 11-12
WIRE HOLE
MOUNTING HOLES (2)
#6-32 X 5/8 FLAT
HEAD SCREWS (2)
THERMOSTAT
M34265