Publicidad
Idiomas disponibles
Idiomas disponibles
5.- ADJUSTING THE ANGLE OF THE HAMMOCK
You can recline the hammock, to carry the baby in the most
comfortable position at all times.
To lower the backrest take hold of the strap found on the
back, with the red logo, and pull it downwards to the requi-
red position.
To raise the backrest pull the strap with the
10a
black logo upwards.
10b
WARNING: The green point is the position for use, P1 and
P2 are only to make the folding procedure easier, do not
use them when your child is in the pushchair.
6.- USING THE SAFETY ARMREST
The safety armrest is designed to fit into the slots on the
hammock.
If required it is possible to release one side of the armrest and it
will still be completely articulated by the other side. There are
buttons on the lower part to do this.
WARNING: The child should be kept away from the mobile parts
when the responsible adult is handling these. The appearance
of cutting, compression and pinch points are inevitable during
these operations.
To fasten the hood onto the frame of the hammock, slide it
from the top down to the corresponding slots on the central
part. Use the zip on the hood to attach it to the frame.
Follow the same steps in reverse order to take the hood off.
11
The handlebar can be set to 7 different positions. Simulta-
neously press the buttons on both sides of the handlebar.
Your pushchair has a safety harness to keep your child safe at
all times. Fit the belt onto the child whenever he is using the
pushchair.
15a.
12-12a
harness.
15b-c.
then insert them into the harness until they click into place.
15d.
the right tension. To adjust the length of the belts, slide the
buckles up or down. Make sure that the belts are not twisted.
7.- USING THE HOOD
8.- ADJUSTING THE HANDLEBAR
9.- SEAT BELT
15
To open the belts, press the button in the middle of the
To fasten it, bring the two side straps together and
Adjust the belts so that they fit the child correctly with
13-13a
14
27
Publicidad
Capítulos
