Pro-Fix System; Fitting And Removing The Hammock; Adjusting The Angle Of The Backrest; Using The Safety Armrest - JANE muum Manual Del Usuario

3.- PRO-FIX SYSTEM

The chassis of your pushchair includes the PRO-FIX system,
ready to incorporate the following auto safety elements:
Rebel, Micro and Matrix Light.
makes it easier to attach and remove these accessories to and
from the chassis, securing them to the chassis in a quick, sim-
ple and safe way. To do this follow the instructions for these
accessories carefully.
WARNING: It is necessary to remove the hammock from the
pushchair to attach any of the auto accessories.

4.- FITTING AND REMOVING THE HAMMOCK

The pro-fix system lets you easily attach the MUUM ham-
mock to the chassis. As it is reversible the hammock can be
positioned facing you while the child is very small or facing
forwards as the child grows. Make sure that the hammock
is securely fastened onto the chassis by pulling it gently
upwards. 14-14a
To remove the hammock, simultaneously pull the unlocking
levers upwards that are situated on both sides of the ham-
mock. 13
26
14-14.a The PRO-FIX system

5.- ADJUSTING THE ANGLE OF THE BACKREST

To provide the baby with maximum comfort at all times, the
backrest has a reclining system. Pull the catch on the rear up-
per part of the backrest to adjust it to one of the 3 reclining
positions possible. 5a

6.- USING THE SAFETY ARMREST

The safety armrest is designed to fit into the slots on the ham-
mock. If required you can release just one side by pressing the
side buttons and the armrest will be fully articulated by the
other end. 15 -15a
WARNING: The child should be kept away from the mobile parts
when the responsible adult is handling these. The appearance
of cutting, compression and pinch points are inevitable during
these operations.