Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
H. Cover Orientation
Your cushion was designed to be sat on in a specific orientation and it must be placed properly in
your wheelchair with the cover oriented correctly with the foam base. It is labeled to indicate the
proper orientation.
WARNING: Failure to properly orient the cushion and cover can affect your skin integrity,
resulting in serious injury or death.
A. Fitting Your Cushion and Wheelchair
1. Initial Cushion Set-Up Without User in Seated Position
•
In determining the right cushion for you, ensure the dimensions are appropriate considering
the width and length of your wheelchair sling or seat pan. If you are unsure, consult your
authorized Ki Mobility supplier or your clinician.
•
Place the cushion in the chair with the material identification tags facing the rear of the chair
and the cushion handle oriented toward the front of the chair. The non-skid texture should
be facing the seat sling or seat pan on your wheelchair.
•
It is important that during normal use the cushion is retained in the wheelchair. It is also
important that the cushion is not displaced during transfers that might cause you to slip or
fall. Your cushion has hook and loop closures and a non-skid bottom to facilitate retention
in a wheelchair. Ensure the cushion hook and loop closures align and mate with the
wheelchair hook and loop closures. If your wheelchair sling or seat pan does not have hook
and loop closures, or they do not align with the cushion, you should consult your
authorized Ki Mobility supplier or your clinician to ensure the cushion is appropriate.
Top
Back
Set-Up, Adjustment and Care
Hook and Loop Closures
(Bottom of Cushion)
Front
Bottom
5
Publicidad
Tabla de contenido
