Silverline 672976 Traducción Del Manual Original página 7

672976
& loop sanding disc on to the Hook & Loop Backing Pad (9)
Operation
WARNING: ALWAYS wear eye protection, adequate respiratory and hearing
protection, as well as suitable gloves, when working with this tool.
Note: Always use clamps to secure the workpiece to the workbench wherever possible.
1. Connect the sander to the air supply and ensure the pressure setting is
correct, see 'Specifications' for the air supply pressure rating
2. Hold the tool by the Handle (5), disengage the Safety Catch (3) and
gently squeeze the Throttle Trigger (4) towards the Handle
3. The Oscillating Spindle (1) will begin to spin. Squeeze the Throttle Trigger
further to increase the speed, slightly release to decrease the speed,
4. With the Hook & Loop Backing Pad (9) spinning at the required speed, slowly
move the pad towards the workpiece and gently engage the material
5. Apply moderate pressure to the workpiece surface during
operation. Do not apply excessive pressure
• To stop the tool, move the disc away from the workpiece, fully release
the Throttle Trigger and allow the Safety Catch to re-engage
Accessories
• A range of accessories and consumables, including Coiled Air Hose (269591), Air Filter
Regulator & Lubricator (245014) and Mini In-Line Oiler (456965) is available from
your Silverline stockist. Spare parts can be obtained from toolsparesonline.com
Maintenance
General inspection
• Regularly check that all the fixing screws are tight
Cleaning
• Keep your tool clean at all times. Dirt and dust will cause internal parts to wear quickly, and
shorten the machine's service life. Clean the body of your machine with a soft brush, or dry
cloth. If available, use clean, dry, compressed air to blow through the ventilation holes
• Clean the tool casing with a soft damp cloth using a mild detergent.
Do not use alcohol, petrol or strong cleaning agents
• Never use caustic agents to clean plastic parts
Lubrication
• Slightly lubricate all moving parts at regular intervals with a suitable spray lubricant
Storage
• Store this tool carefully in a secure, dry place out of the reach of children
Mini Air Sander
silverlinetools.com
7