Description Of Symbols - Silverline 672976 Traducción Del Manual Original

GB
Introduction
Thank you for purchasing this Silverline tool. This manual contains information
necessary for safe and effective operation of this product. This product has
unique features and, even if you are familiar with similar products, it is necessary
to read this manual carefully to ensure you fully understand the instructions.
Ensure all users of the tool read and fully understand this manual.

Description of Symbols

The rating plate on your tool may show symbols. These represent important information about
the product or instructions on its use.
Wear hearing protection
Wear eye protection
Wear breathing protection
Wear head protection
Wear hand protection
Read instruction Manual
WARNING: Moving parts can cause crush and cut injuries.
DO NOT use with compressed gas cylinders!
Caution!
Conforms to relevant legislation and safety standards
Environmental Protection
Air tools should not be disposed of with household waste. They contain traces
of oil and other lubricants. Please recycle where facilities exist. Check with your
local authority or retailer for recycling advice.
Technical Abbreviations Key
n
o
n
Nm
psi
°
Ø
W, kW
/min or min
-1
rpm
BSP
dB(A)
m/s
2
4
No load speed
Rated speed
Newton metres (torque)
Pounds per square inch
Degrees
Diameter
Watt, kilowatt
Operations per minute
Revolutions per minute
British Standard Pipe (thread)
Decibel sound level (A weighted)
Metres per second squared
(vibration magnitude)
Original Instructions
Specification
No load speed: ...................................................................................15,000min
Backing pad: .......................................................................................Ø50mm (2")
Orbit variation: ............................................................................................... 3mm
Maximum operating pressure: .....................................................6.3Bar (91.3psi)
Air Consumption (CFM): ...........................................................4CFM / 113Ltr/min
Inlet connection: .........................................................................................¼" BSP
Oil specification: .......................................................................Generic Air Tool Oil
Weight: .......................................................................................................0.62kg
As part of our ongoing product development,
specifications of Silverline products may alter without notice.
Sound and vibration information:
Sound Pressure L : ....................................................................................96dB(A)
PA
Sound Power L : .....................................................................................107dB(A)
WA
Uncertainty K: ...................................................................................................3dB
Weighted vibration ah(main handle): ..................................................... 11.8m/s
Uncertainty K: ........................................................................................... .1.5m/s
The sound intensity level for the operator may exceed 85dB(A)
and sound protection measures are necessary.
WARNING: Always wear ear protection where the sound level exceeds 85dB(A) and limit
the time of exposure if necessary. If sound levels are uncomfortable, even with ear protection,
stop using the tool immediately and check the ear protection is correctly fitted and provides
the correct level of sound attenuation for the level of sound produced by your tool.
WARNING: User exposure to tool vibration can result in loss of sense of touch,
numbness, tingling and reduced ability to grip. Long term exposure can lead to a chronic
condition. If necessary, limit the length of time exposed to vibration and use anti-vibration
gloves. Do not operate the tool with hands below a normal comfortable temperature,
as vibration will have a greater effect. Use the figures provided in the specification
relating to vibration to calculate the duration and frequency of operating the tool.
Sound and vibration levels in the specification are determined according to international
standards. The figures represent normal use for the tool in normal working conditions. A poorly
maintained, incorrectly assembled, or misused tool, may produce increased levels of noise and
vibration. www.osha.europa.eu provides information on sound and vibration levels in
the workplace that may be useful to domestic users who use tools for long periods of time.
-1
2
2