Tabla de contenido
Publicidad
8
4. Symbols on the machine
For safe operation and maintenance,
symbols are on the machine. According to
these indications, please be careful not to
take a mistake.
(a). The port to refuel the "MIX GASOLINE"
Position: fuel tank cap
(b). The port to refuel the "CHAIN OIL"
Position: oil cap
(c). The indication regarding the switch.
Flipping the engine switch to the "O" (STOP)
direction, the engine stops.
Position: upper part of the unit
(d). The indication regarding the choke.
Pulling out the choke knob, the choke closes.
Position: front of the chain cover
(e). The position of H-needle
The position of L-needle
The position of idle adjusting screw
Position: Front of the chain cover
(f). It shows the directions that the chain brake is
released (for the white arrow) and activated (for
the black arrow).
Position: Front of the chain cover
■ EMISSION CONTROL
An emission control label is located on the engine.
IMPORTANT ENGINE INFORMATION
THIS ENGINE CONFORMS TO US EPA
PH1 FOR SMALL OFF-ROAD ENGINES.
ENGINE FAMILY: 3E8XS.0304TH
ENGINE DISPLACEMENT: 30.1cm
MANUFACTURED:
REFER TO OWNER'S MANUMAL FOR MAINTE-
NANCE SPECIFICATIONS AND ADJUSTMENTS.
THIS SAW IS FOR TRAINED TREE
WARNING!
SERVICE OPERATORS ONLY.
SEE INSTRUCTION HANDBOOK!
3
MADE IN ITALY
Publicidad
Tabla de contenido
