Set Area Code And Pabx (Private Automatic Central) Code; Lcd Contrast Adjustment - Steren TEL-008BL Manual De Instrucciones

4
Press "set" to save the changes and release the "Hang up Switch" to exit the
menu.

SET AREA CODE AND PABX (PRIVATE AUTOMATIC CENTRAL) CODE

1
Perform steps 1 to 3 of the "Access the configuration menu" section of this
instruction manual. (In step 3 you must press the number 3 on the keyboard).
The display will show:
Press on the keyboard, the number corresponding to the adjustment required.
2
To configure the local code, enter the code afterwards.
To configure the PABX code press "up / cid", then enter the code.
3
Press "set" to save the changes and release the "Hang up Switch" to exit the
menu.

LCD CONTRAST ADJUSTMENT

1
Perform steps 1 to 3 of the "Access the
configuration menu" section of this
instruction manual. (In step 3 you must
press the number 4 on the keyboard).
Code PABX setting
Local code setting
The display will show:
6