Playing Tracks Repeatedly (Repeat Play) - Sony MHC-V800 Manual De Instrucciones

continued
To check the contents of the
program (from remote only)
Press CHECK before starting playback.
Each time you press CHECK the next step
appears in the display.
When the last step "CHECK END" is
displayed and the normal display returns.
To change the contents of the
program
To Press
Erase a specific CHECK repeatedly so
track that the number of the
track lights up, and
press CLEAR
Erase a track from CLEAR in stop mode
the end
Add a track at 1.Turn the JOG dial
the end of the
program
2.Press ENTER/NEXT.
Erase the entire p once in stop mode
EN
program and twice while
16 playing
Notes
•The program you made still remains in
the CD player, so you can play the same
program again.
•If "--.--" appears instead of the total
playing time during programming, this
means you have programmed a track
numbered greater than 20, or the total
playing time has exceeded 100 minutes.
Chapter 2: the Video CD/CD-G/CD Player
Playing Tracks
Repeatedly
(repeat play)
The repeat play function repeats a single
CD or all CDs in normal play, shuffle play
and program play.
Use the buttons on the unit to do this
operation.
until the desired
track number
appears in the
display.
1/ALL DISCS
Repeating all the tracks
1 Press REPEAT repeatedly until
"REPEAT" appears in the display.
2 P r e s s ·
To
Repeat all the
tracks on the
current CD
Repeat all the
tracks on all CDs
Repeat only one
track
To cancel repeat play
Press REPEAT repeatedly until "REPEAT"
or "REPEAT 1" disappears from the
display.
Note
You can not repeat a single track during
shuffle or program play.
POWER m ON
REPEAT
.
Press
1/ALL DISCS
repeatedly until "1
DISC" appears in the
display.
1/ALL DISCS
repeatedly until "ALL
DISCS" appears in the
display.
REPEAT repeatedly
until "REPEAT 1"
appears in the display
while playing the track
you want to repeat.