Chain Lubricant; Filling Chain Oil Tank - Stihl MS 661 C-M Manual De Instrucciones

Ocultar thumbs Ver también para MS 661 C-M:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Chain Lubricant

For automatic and reliable lubrication of
the chain and guide bar – use only an
environmentally compatible quality
chain and bar lubricant. Rapidly
biodegradable STIHL BioPlus is
recommended.
NOTICE
Biological chain oil must be resistant to
aging (e.g. STIHL BioPlus), since it will
otherwise quickly turn to resin. This
results in hard deposits that are difficult
to remove, especially in the area of the
chain drive and chain. It may even cause
the oil pump to seize.
The service life of the chain and guide
bar depends on the quality of the
lubricant. It is therefore essential to use
only a specially formulated chain
lubricant.
WARNING
Do not use waste oil. Renewed contact
with waste oil can cause skin cancer.
Moreover, waste oil is environmentally
harmful.
NOTICE
Waste oil does not have the necessary
lubricating properties and is unsuitable
for chain lubrication.
MS 661 C-M

Filling Chain Oil Tank

Preparing the machine
Thoroughly clean the filler cap and
N
the area around it to ensure that no
dirt falls into the tank
Always position the machine so that
N
the filler cap is facing upwards
Open the filler cap
N
Filling chain oil tank
Standard setting
Always refill the chain oil tank every
N
time you refuel
Setting for increased oil delivery rate
See chapter "Oil Quantity Control".
Always refill the chain oil tank every
N
time you refuel
In addition, when using this setting, you
must monitor the chain oil level between
refuelings to make sure there is still oil in
the oil tank. If necessary, add chain oil
also between refuelings.
There must always be some chain oil in
the oil tank when the fuel tank reaches
empty.
Take care not to spill chain oil during
refilling and do not overfill the tank.
Close filler cap
N
If chain lubrication is abnormally low, the
reason may be a problem in the oil
supply system:
Check chain lubrication
N
Clean the oil passages
N
If necessary, contact your servicing
N
dealer for assistance
STIHL recommends that maintenance
and repair work be carried out only by
authorized STIHL dealers.
English
31

Publicidad

Capítulos

Tabla de contenido
loading

Tabla de contenido