Setting The Exposure Correction (Ev) On The; Master Flash Unit; Remote Channel Settings - Metz mecablitz 52 AF-1 Pentax digital Manual De Instrucciones

Ocultar thumbs Ver también para mecablitz 52 AF-1 Pentax digital:
Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 224
9.1.2 Setting the exposure correction (EV) on
REMOTE
MASTER
the master flash unit
• Press the
Z
35
OOM
mm
display.
EV
INFO
+ 2 / 3
• Press the
+ 1
touch display and set the desired exposure
correction (e.g. +1).
+ 1 1 / 3
• Press the sensor button for the desired
exposure correction value
REMOTE
MASTER
The setting is adopted immediately.
Z
35
OOM
mm
EV
INFO
+1
EV
sensor button on the touch
sensor buttons on the
+1
.

9.1.3 Remote channel settings

There are four independent remote channels
to use so that multiple remote systems in the
same room do not interfere with one another.
Master and Slave flash units belonging to the
same remote system must be set to the same
remote channel.
• Press the
for the selection menu to appear.
• Press the
touch display.
ZOOM
CHANNEL
• Press the
touch display and select "CHANNEL".
• Press the
touch display.
1
• Press the
CH
2
touch display and select a remote channel,
3
2 CH
e.g
• Press the sensor buttons on the touch dis-
play e.g.
The setting will take effect immediately.
The channel setting can be checked by pres-
sing the sensor button
D
button as often as it takes
PARA
sensor button on the
sensor buttons on the
CHANNEL
sensor button on the
sensor buttons on the
.
2 CH
for the channel selected.
INFO
.
k
157

Publicidad

Tabla de contenido

Solución de problemas

loading

Tabla de contenido