Switching-Off Servo Flash Mode - Metz mecablitz 52 AF-1 Pentax digital Manual De Instrucciones

Setting procedure for the learn function
The AF pre-flash function of the camera must
be switched off.
SYNC
M-SERVO
• Press the
touch display as many times as it takes for
Z the selection to appear.
24 mm
OOM
INFO P
SYNC
• Press the
display.
• "Learning Mode" is ready to learn.
Learn
• Press the release button on the camera so
that the camera's own flash unit is
activated.
If the SERVO flash unit has received a light
pulse, then "LEARN OK" appears in the dis-
play as confirmation.
The macablitz 52 AF-1 digital has learned the
flash of the camera flash unit.
SYNC
sensor buttons on the
Learn
sensor button on the touch

9.5.5 Switching-off SERVO flash mode

SYNC
• Press the displayed mode of operation on
M-SERVO
the touch display as many times as it takes
for the display for selecting the mode of
Z
24 mm
OOM
operation to appear.
INFO 1/16
SLAVE
• Press the
SERVO
touch display and select the desired mode
of operation, e.g
• Press the sensor button on the touch dis-
play for the mode of operation, e.g
P TTL
P TTL HSS
The selected mode of operation is adopted.
sensor buttons on the
P TTL
.
P TTL
.
k
163