Setting The Flash Mode On The Master Flash Unit; Partial Light Output In M-Mode Settings On; The Master Flash Unit - Metz mecablitz 52 AF-1 Manual De Instrucciones

Ocultar thumbs Ver también para mecablitz 52 AF-1:
Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 232
10.1.2 Setting the flash mode on the master
REMOTE
TTL
CTRL +
• Press the sensor button on the touch
CTRL RMT RMT2
display for the mode as many times as it
1 1
1
takes for the mode to appear.
INFO
RATIO
• Press the sensor button on the touch
TTL
display for the desired mode of operation
M
REMOTE
M
CTRL +
1/1
The set mode of operation is adopted
CTRL RMT RMT2
immediately.
1 1
1
INFO
RATIO
k
162
flash unit
TTL
M
or alternatively
.
10.1.2.1 Partial light output in M-mode
settings on the master flash unit
REMOTE
M
CTRL +
1/1
Set the mode to
CTRL RMT RMT2
• Press the
1 1
1
display as many times as it takes for the
master selection to appear.
INFO
RATIO
• Press the
TTL
display for the partial light output.
M
1/1
• Auf dem Touch-Display die Sensortasten
1/1
Teillichtleistung einstellen.
-1
1/1
/
3
• Press the sensor button of the selected
partial light output
1/8
-2
/
display.
3
1/16
-1
1/16
/
3
The setting is adopted automatically.
REMOTE
M
CTRL +
1/16
CTRL RMT RMT2
1 1
1
INFO
RATIO
M
as described in 10.1.2.
M
sensor button on the touch
1/1
sensor button on the touch
drücken die gewünschte
1/16
on the touch

Publicidad

Tabla de contenido

Solución de problemas

loading

Tabla de contenido