Choosing Priority Ringing; Using Your Telephone With A Pabx - Topcom BUTLER 2505 Manual De Uso

B2505_eur.book Page 16 Tuesday, December 31, 2002 11:49 AM
ENGLISH

5.3 CHOOSING PRIORITY RINGING

This function allows you to make the base or one of the handsets ring before the others when there is an external call.
The priority unit will ring a number of times, then the others units will start to ring in turn.
To use this function, you must choose the priority unit, this can be the base or one of the handsets. You can set the
number of rings before the other units start ringing.
Setting the priority unit
1. Enter the menu by pressing
2. Select SETUP using the up
3. Press OK
4. Select priority using the up
5. Press OK
6. Select "SELECT" using the up
7. Press OK
8. Select "BASE" or "HANDSET X" using the up
9. Press OK to validate
10. Choose the number of rings using the up
11. Press OK to validate
Activate / Deactivate the priority ring
1. Enter the menu by pressing
2. Select Setup using the up
3. Press OK
4. Select priority using the up
5. Press OK
6. Select "ON" or "OFF" using the up
7. Press OK to validate

5.4 USING YOUR TELEPHONE WITH A PABX

It is possible to use your telephone with a PABX or a local telephone network.
Use of your telephone with a recent system does not require any special adjustment. With certain older systems, it is
necessary to insert a pause between dialling a prefix and dialling the rest of the number. Your telephone can inserts
this pause automatically during the numeration.
In order to do this you must enter the prefix and the pause length.
It is possible to choose 2 prefixes for 2 different PABX.
To remove the pause, delete the prefix in memory in the same way as you entered it.
Setting the prefix
1. Enter the menu by pressing
2. Select Setup using the up
3. Press OK
4. Select PABX using the up
5. Press OK
6. Select PBX1 or PBX2 using the up
7. Press OK
8. Enter the PIN code (default = 0000)
9. Press OK to validate
10. Enter the PABX prefix
11. Press OK to validate
Setting the pause duration
1. Enter the menu by pressing
2. Select Setup using the up
3. Press OK
4. Select PABX using the up
5. Press OK
6. Select PAUSE using the up
7. Press OK
8. Select the PAUSE time using the up
9. Press OK to validate
16
/OK
and down keys
and down keys
and down keys
and down
and down keys
/OK
and down keys
and down keys
and down keys
/OK
and down keys
and down keys
and down keys
/OK
and down keys
and down keys
and down keys
and down keys
keys
Topcom Butler 2505/2510