smartheart 51-1490 Manual De Instrucciones página 29

ERROR CODES
Code
E1 The cuff is not secure
E2 The cuff is too tight
E3 The cuff pressure is in excess
E10 or
E11 The monitor detected motion while
measuring
E20 The measurement process does not detect
the pulse signal.
E21 The unit measured incorrectly
EExx A calibration error occurred.
OUT Out of measurement range
Meaning
Corrective Action
Re-apply the cuff and attempt new
measurement.
Re-apply the cuff and attempt new
measurement.
Relax for several minutes and attempt new
measurement.
Sit comfortable and remain still; attempt a
new measurement
Re-apply the cuff and attempt new
measurement.
Relax for a moemnt and then measure
again.
Retake the measurement; if the problem
persists, contact the Customer Care.
Relax for several minutes and attempt new
measurement; if error persists, review with
your physician.
ENGLISH • 29