Varian Turbo-V 70 PCB Manual De Instrucciones página 52

INSTALLATION
!
Voltages between controller and power transformer and
transformer and mains are dangerous in case of
contact.
Protect adequately the controller and the transformer
installed into the customer system from accidental
contacts.
!
High voltage developed in the controller can cause
severe injury or death. Before servicing the unit,
disconnect the input power cable. High temperature
developed in the controller can cause severe injury.
Protect adequately the controller from accidental
contacts.
Interconnection Cable Controller - Pump
Interconnection Cable Controller - Power Transformer
WARNING!
WARNING!
The controller installed into the customer system must
be positioned so that cold air can flow through the PCB
components.
Do not install or use the controller in an environment
exposed to atmospheric agents (rain, snow, ice), dust,
aggressive gases, or in explosive environments or
those with a high fire risk.
During operation, the following environmental conditions
must be respected:
temperature: from O °C to +40 °C
•
relative humidity: 0 - 95%
•
(without condensation).
46
INSTRUCTIONS FOR USE
NOTE
87-900-871-01 (B)