The Basics - Samsung WA52M8650A Serie Manual Del Usuario

Washing a load of laundry

The basics

Prewash (Water Jet & Built-in sink)
42 English
WA8600M_DC68-03774C-04_EN.indd 42
Water Jet function and the Built-in sink let you
hand-wash items before you place them in
the washing machine. The Water Jet function
is available only when the lid is open and the
water level is set to less than High. To hand-
wash, use the Built-in sink that is designed to
facilitate hand-washing.
1. With the lid open, lower the Built-in sink .
To open only the lid, press and release the
front middle of the lid. To close and lock
both the lid and the Built-in sink, press
down on the lid until you hear a click.
2. Put the clothes you want to hand-wash into
the sink.
3. Press Water Jet to supply water to the
Built-in sink, and then hand-wash.
4. When done, gently lift up the Built-in sink
to drain water into the tub.
NOTE
• If you want to hand-wash while the washer
is operating, press START/PAUSE to stop
operation, and then follow steps 1-4 above.
• If you open both the lid and the Built-in
sink, lower the Built-in sink manually for
hand-washing.
[The Water Jet stops]
• The Water Jet function stops operating
automatically when the washing machine
detects the maximum water level.
• The Water Jet function stops operating
automatically 5 minutes after it begins. To
add more water, press Water Jet again to
resupply water.
2019-02-14 5:36:31