Samsung WA52M8650A Serie Manual Del Usuario página 58

Troubleshooting
No Code
5
6
7
8
9
10
58 English
WA8600M_DC68-03774C-04_EN.indd 58
Water is not draining.
• Make sure the drain hose is not frozen or clogged.
• Make sure the drain hose is positioned correctly, depending
on the connection type.
• Clean the mesh debris filter as it may be clogged.
5C
• Make sure the drain hose is straight all the way to the drain
system.
• Turn off the washer, unplug it, wait one minute, and then plug
the washer in again. If the information code remains, contact
a Samsung customer service center.
The electronic control needs to be checked (Over Voltage Error).
• Check if power is supplied properly.
9C1 • Turn off the washer, unplug it, wait one minute, and then plug
the washer in again. If the information code remains, contact
a Samsung customer service center.
Low voltage detected.
Check if the power cord is plugged in.
•
9C2 Turn off the washer, unplug it, wait one minute, and then plug
•
the washer in again. If the information code remains, contact
a Samsung customer service center.
Inverter Communication problem.
• Turn off the washer, unplug it, wait one minute, and then plug
AC6
the washer in again. If the information code remains, contact
a Samsung customer service center.
Operating the washer with the door open.
dC • Make sure the door is properly closed.
• Make sure laundry is not caught in the door.
High temperature heating check.
• Turn off the washer, unplug it, wait one minute, and then plug
HC
the washer in again. If the information code remains, contact
a Samsung customer service center.
Meaning
2019-02-14 5:36:33