Cleaning The Air Filter; Changing The Clipper/Shear Head (Option); Storing The Clipping Machine; Repairs - Heiniger USV/K Manual De Instrucciones

4.4 Cleaning the Air Filter

The air filter element is found on the underside of the motor section of the machine. The air
filter element can be removed from the machine for cleaning. Regularly cleaning the element
with a dry brush is essential. When cleaning the air filter, take care that no foreign bodies get
into the machine.
Illustr. 12
The machine must never be operated without the air filter element!

4.5 Changing the Clipper/Shear Head (Option)

To change the head from "Sheep" to "Cattle" or vice-versa, loosen both head screws. Remove
one head and fit the other (Grease cog wheel, Illustration 1, Item 9, if necessary). Re-tighten
both screws.
Illustr. 13

4.6 Storing the Clipping Machine

Only store the machine in a dry place and in the case supplied. Do not switch on the machine if
you suspect any liquid has got into ist. There is then a risk of an electric shock or short circuit.
Hand the clipping machine into a service centre.
Make it a habit to store the machine between use, store it well-cleaned, oiled and with tension
slackened off, in its storage case, in a clean, dry place, out of the reach of children.
Illustr. 14

5 Repairs

This product has been developed and assembled using the best individual components
available.
It is designed to give longevity and high performance. If spare parts are used during the life of
this product, please ensure that they are genuine Heiniger parts. Failure to use genuine Hei-
niger spares may reduce the performance of this precision engineered product and will void
any warranty claim.

5.1 Introduction

Actions to be taken to rectify malfunctions are indicated in the "Rectification" column of the
malfunction lists. Those rectification notes printed on a dark background may only be carried
out by an authorised service centre.
Details of authorised service centres are to be found at the end in the "Contact Addresses"
section.

5.2 Malfunction Lists

Contact an authorised service centre in the event of malfunctions not contained in these
instructions.
Instruction manual USV 11