SKF TKSA 11 Instrucciones De Uso página 20

b. Tolerances
Select the tolerances for the alignment. The built-in tolerance
table is based on the speed of the machine being aligned.
Note:
Tolerances are available in metric or imperial units.
c. Machine ID
Enter a machine name which will be shown in the report
(Optional).
d. Photo
Add a picture of your machine for the report (Optional).
e. Soft foot
A machine has a soft foot condition when it does not rest
equally on all its feet. This is similar to a chair rocking on
three feet.
The presence of a soft foot condition can make the process
of aligning more difficult. If you encounter issues with your
alignment, check for a soft foot condition and correct it when
found.
Click on the Soft Foot line to see recommendations on how to
measure and correct a soft foot condition.
18 SKF TKSA 11