Safety Recommendations - SKF TKSA 11 Instrucciones De Uso

• The complete instructions for use are available on SKF.com and within the
SKF TKSA 11 app.
• Read and follow all warnings in this document before handling and
operating the equipment. You can be seriously injured, equipment and
data can be damaged if you do not follow the safety warnings.
• Always read and follow the operating instructions.
• Dress properly. Do not wear loose clothing or jewellery.
Keep your hair, clothing, and gloves away from moving parts.
• Do not overreach. Keep proper footing and balance at all times to enable
better control of the device during unexpected situations.
• Use safety equipment. Non-skid safety shoes, hard hat or hearing
protection must be used for appropriate conditions.
• Never work on energized equipment unless authorized by a responsible
authority. Always turn off the power of the machine before you start.
• Do not expose the equipment to rough handling or impacts this will void
the warranty.
• Avoid direct contact with water, wet surfaces, or condensing humidity.
• Do not attempt to open the device.
• Use only accessories that are recommended by SKF.
• Device service must be performed only by qualified SKF repair personnel.
• We recommend calibrating the tool every 2 years.
SKF TKSA 11

Safety recommendations

5