Triple diffuser base
To gain the maximum from the heat, the cooker has a triple heat-
diffusing base made of Stainless Steel (AISI 304) in the body - Aluminium
- and Ferritic Stainless Steel (AISI 430) in the base. This special diffuser
base absorbs and transmits, spreading the heat evenly from gas, electric,
glass-ceramic, or induction hobs.
Four security systems
In case of excess pressure:
• The cooker has four safety systems in order to
guarantee the maximum levels of safety during its
use. The safety valve will act rapidly releasing the
steam from the cooker through the outlet holes in
the top part of the handle.
• A second valve acts releasing the steam from the
cooker and increasing the pressure to slightly above
that reached with the action of the first valve, or in
the unlikely event that it did not work.
• Similarly, the carefully designed lid of the cooker
and its seal constitute a third safety system. If both
of the safety valves were not work, the rubber seal
would expand, coming out of the groove of the lid,
thus releasing the pressure from the cooker through
the side away from the position of the user and
leaving them safely protected.
• Finally, the pressure cooker has a locking system
that would not allow it to open if there was minimal
pressure inside.
The closure seal should be renewed each year.
(1)
(3)
(4)
Aluminium
Magnetic
Inox
(2)
Inox 18/10
(1)
(2)
(3)
(4)
23