DKN technology R-310 Manual De Instrucciones página 41

Summary
Make sure if a fitness training doesn't
•
cause problems for your health.
Evaluate your level of power, endurance,
•
flexibility, speed and coordination before
you start training.
Set realistic goals based on your physical
•
possibilities.
Set up a training program for a longer
•
period (6 to 12 months)
Divide your long term planning up into
•
different cycles (meso cycle) of 4 to 6
weeks.
Make sure there is enough variation in
•
your training. Train on endurance, power
and muscle development.
If you choose for endurance training, vary
between short, mid-long and long training
periods.
During a meso cycle you have to increase the
intensity of the training for endurance as well
as for muscle training. Limit the intensity of the
training in the beginning of every new cycle.
Evaluate regularly your training to make sure
you are on the right track and if you can
achieve your most important goals, if not:
Adapt the next meso cycle
•
Repeat the initial test
•
Do interim tests at the end of every meso
•
cycle
Success
Even after a short period of regular exercises
you will realise that you constantly have to
increase the pedalling resistance to reach your
optimum pulse rate.
The units will be continuously easier and you
will feel a lot fitter during your normal day.
For this achievement you should motivate
yourself to exercise regularly. Choose fixed
hours for your work out and do not start
training too aggressively.
An old saying amongst sportsmen says:
"The most difficult thing about training is to
start it."
Wishing you lots of fun and success with your
exerciser.
Heart rate displayed is an approximate
read-out, and may not be used as
guidance in any cardio-vascular related
medical or paramedical program.
All data displayed are approximate
guidance and cannot be used in any
medical application.
The owner's manual is only for
customers' reference.
The supplier can not guarantee for
mistakes occurring due to translation
or changes in technical specifications
of the product.