Lockout Sub-Menu - OHAUS FD Serie Manual De Instrucciones

FD Series Scales EN-19
3.7.6

Lockout sub-menu

Press Yes to enter the Lockout sub-menu.
Reset
Press Yes to enter the Reset sub-menu.
• No – does not change the Lockout sub-menu settings.
• Yes – reset the Lockout sub-menu to the factory default
settings (bold and underlined text herein).
Lock Calibration
Press Yes to enter the Lock Calibration sub-menu.
• Off – enable changes to the Calibration sub-menu.
• On – lock Calibration sub-menu settings.
Lock Setup
Press Yes to enter the Lock Setup sub-menu.
• Off – enable changes to the Setup sub-menu.
• On – lock Setup sub-menu settings.
Lock Readout
Press Yes to enter the Lock Readout sub-menu.
• Off – enable changes to the Readout sub-menu.
• On – lock Readout sub-menu settings.
Lock Unit
Press Yes to enter the Lock Unit sub-menu.
• Off – enable changes to the Unit sub-menu.
• On – lock Unit sub-menu settings.
Lock Mode
Press Yes to enter the Lock Mode sub-menu.
• Off – enable changes to the Mode sub-menu.
• On – lock Mode sub-menu settings.
End
• Press Yes to leave this sub-menu and go to the next.
• Press No to return to the top menu item in this sub-menu.