Using Olympus Master 2 - Olympus Stylus-1070 Manual Del Usuario

Using OLYMPUS Master 2

System requirements and
installation of OLYMPUS
Master 2
Install the OLYMPUS Master 2 software by
referring to the included installation guide.
Connecting the camera to a
computer
1
Make sure the camera is turned off.
●
The monitor is off.
●
The lens barrier is closed.
2
Connect the camera to a computer.
●
The camera automatically turns on.
USB
PC
EASY PRINT
CUSTOM PRINT
EXIT
Multi-connector
Locate the position of the USB port by
referring to your computer's instructions
manual.
16 EN
Connector cover
Open the connector
SET OK
cover in the direction
of the arrow.
USB cable (supplied)
3
CE
Use to select [PC], and press
the x button.
●
The computer automatically detects the camera as
a new device on the fi rst connection.
Windows
After the computer detects the camera, a
message indicating the completion of the
setting appears. Confi rm the message and
click "OK". The camera is recognized as a
removable disk.
Macintosh
When iPhoto started, exit iPhoto and start
OLYMPUS Master 2.
While the camera is connected to the
computer, shooting functions are disabled.
Connecting the camera to a computer via a
USB hub may cause unstable operation.
When [MTP] is set for the submenu that
appears by pressing
in Step 3, images cannot be transferred to a
computer using OLYMPUS Master 2.
Starting OLYMPUS Master 2
1
Double-click the OLYMPUS Master 2
icon.
Windows
appears on the desktop.
Macintosh
appears in the OLYMPUS Master 2 folder.
●
Browse window appears after starting the
software.
When you start OLYMPUS Master 2 for the
fi rst time after installation, "Default Settings"
and "Registration" screens appear. Follow
the instructions on the screen.
D
after selecting [PC]