Publicidad
7
ROPE RESCUE
Seat harness:
EN 813: 2008
Ventral attachment point
made up of the connection
ring.
Nominal load: 100 kg
Designed for progression on
rope and work positioning,
this attachment point is
not an EN 363 fall arrest
attachment point.
Use the connection ring to
attach a descender, rope
clamps or work positioning
lanyards, etc.
JANE
I'D
etc...
5
FALCON MOUNTAIN
C385030E (080710)
8
Mountaineering EN 12277 type C
Ventral attachment point made
EN 813
up of two textile bridges or the
2008
connection ring.
Tie-in with a figure 8 knot taking
care to correctly join the leg loop
bridge and the belt bridge (see
drawing). Adjustment is possible
by varying the loop size of the tie-in
knot.
WARNING, tying-in incorrectly can
result in serious injury or death.
When there is no risk of a free-fall,
for example in top-roping or glacier
travel, two locking connectors may
be used to tie-in (never use a single
connector to tie-in).
Use the connection ring to attach
a device.
STOP
EN 813
EN 12277
type C
2008
JANE
I'D
etc...
EN 12277
type C
Publicidad
