Ryobi TSS103 Manual Del Operador página 20

 L oosen the fence screw and slide the partial sliding miter
fence toward the blade to access the socket head screws
securing the left miter fence to the table.
 Using the blade wrench provided, loosen the socket head
screws that secure the miter fence to the miter table.
 Rotate the miter fence left or right until the saw blade is
parallel with the square.
 Retighten the screws securely and recheck the blade-to-
fence alignment.
 Return the partial sliding miter fence to the home position
and retighten the fence screw to secure.
Your saw has several scale indicators. After squaring adjust-
ments have been made, it may be necessary to loosen the
indicator screws and reset them to zero. See Figures 22 - 23.
SOCKET HEAD
SCREW(S)
FENCE
SCREW
PARTIAL
SLIDING
MITER
FENCE
MITER
FENCE
ASSEMBLY
SOCKET HEAD
SCREW(S)
Fig. 21
20 − English
BEVEL
LOCK KNOB
BEVEL
INDICATOR
SCALE
SCREW
SCALE
INDICATOR
INDICATOR
SCREW
MITER
SCALE
Fig. 22
SCALE
INDICATOR
Fig. 23