Output Color System
Changes the color system according to the
connected monitor (SECAM is not supported):
[NTSC], [PAL].
(Available only when no source is selected.)
Camera Input
Selects the image from the rear view camera:
[Normal], [Reverse] (mirror image), [OFF].
Steering Control
Selects the input mode for the connected
remote control. To prevent a malfunction, be
sure to match the input mode with the
connected remote control before use.
Custom
Input mode for the steering wheel remote
control (Automatically selected when [User
Defined] is complete.).
Preset
Input mode for the wired remote control
excluding the steering wheel remote control.
User Defined
The steering button panel appears.
Press and hold the button you want to assign
to the steering wheel.
The button on the panel lights up (standby).
Press and hold the button on the steering
wheel you want to assign the function to.
The button on the panel changes to blue
(registration complete).
To register other functions, repeat steps
and .
(Available only when [Steering Control] is set to
[Custom].)
Notes
While making settings, only button operation on
the unit is available. For safety, park your car
before making this setting.
If an error occurs while registering, all the
registered information is cleared. Restart
registration from the beginning.
This function may not be available on some
vehicles. For details on the compatibility of your
vehicle, visit the support site on the back cover.
Bluetooth Connection (XAV-W650BT/XAV-V630BT)
Activates the BLUETOOTH signal: [OFF], [ON],
[Pairing] (enters into pairing standby mode).
Bluetooth Device Info (XAV-W650BT/XAV-V630BT)
Displays the information of the device
connected to the unit by touching [Open].
(Available only when [Bluetooth Connection] is
set to [ON])
Bluetooth Reset (XAV-W650BT/XAV-V630BT)
Initializes all BLUETOOTH-related settings such
as pairing information, call history, preset dial,
history of connected BLUETOOTH devices, etc.
SongPal (XAV-W650BT/XAV-V630BT)
Establishes or terminates the "SongPal" function
(connection): [Connect], [Disconnect].
SOURCE Key Func. (XAV-W650BT/XAV-V630BT)
Assigns the voice command function or the
display menu to the SOURCE button: [Voice],
[DSPL].
Rear View Camera (XAV-W650BT/XAV-W600)
Adjusts the length and/or position of the marker
lines on the picture from the rear view camera
by touching [Line Edit].
FM Tuning Interval
Selects the FM tuning interval: [100kHz],
[200kHz].
19
GB