Data Download - Megger S1-5005 Guia Del Usuario

Data Download

appear. Every time the program is run, the Name and path
will default to C:\BM25\loaded.dat. A new file path name
may be entered by overtyping the default. Use the
to move to the next entry. If Spreadsheet file format ( 1) was
selected, the default filename loaded may be changed
by overtyping. Ensure that .wks is not removed or altered.
4. On completion press <ENTER> to move on to the download
window.
5. The S1-5005 can now be switched on by pressing the
'On/Off' switch once. At the end of the calibration check, the
software version will appear in the down-load window.
Note: If the instrument is not identified after the calibration
period, an error has occurred. Switch the instrument off, stop the
software program and check the 9 way lead connections.
Restart the software, making sure that the correct port has been
entered at the command prompt.
6. Set the required test settings and duration on the S 1 - 5 0 0 5.
A test of 90 minutes duration will create a data file of
approximately 43 KB. The standard data file has room for
approximately nine 10 minute tests.
7. To start a test and begin downloading, press the red start
16
button for at least 1 second. Text identifying the test settings
will be displayed (Resistance in MΩ) followed by the measured
keys
results at 5 second intervals.
8. On full completion of a test, the word 'Finished' will be
displayed, together with the measured data in scientific
notation.
e.g. 5,108e+04
Note: Downloaded data usually contains more significant figures
than the 'rounded' result displayed on the instrument.
9. At the end of a download, one or two files will have been
created in the default or specified path location. These files can
then be imported into a variety of databases, spreadsheets or
graph software packages. See Appendix 2.
Note: A test can be stopped and started at any point without
affecting the download data. If a test is terminated before its set
duration, pressing 'Esc' will convert the existing data for that test.
= 5,108 M x 10 4
51,08 G .
=