Installing The Paper Roll - Epson TM-H5000II Manual Del Usuario

Ocultar thumbs Ver también para TM-H5000II:
Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 61
CAUTION:
Never turn the ribbon cassette's feed knob in the opposite direction of
the arrow marked on the cassette; otherwise the ribbon cassette may
be damaged.
1. Turn the printer on, and open the front cover by pulling up the
tab on the left side.
2. Be sure the print head is on the right side.
3. If a ribbon is already installed, remove it by grasping the end of
the tab and removing it from the printer.
4. Turn the cassette knob on the
cartridge in the direction of the
arrow 2 or 3 times to remove
any slack.
5. Insert the ribbon, and rotate the
cassette knob 2 or 3 more times,
as shown in illustration
6. Make sure the ribbon has no
wrinkles or creases and is installed below the print head as
shown on the label inside the printer.

Installing the Paper Roll

1. Press the button, as shown in illustration
2. Insert the paper roll as shown in illustration
is inserted correctly as shown in illustration
4
3. Pull out a small amount of paper, close the cover, and tear off
the paper.
3
.
3
5
TM-H5000II User's Manual 7
English
, to open the cover.
4
. Make sure that it
5
.
6
6

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

M128c

Tabla de contenido