Getting Started; Initial Operation; Toasting - Silvercrest STE 950 C1 Manual De Instrucciones E Indicaciones De Seguridad

7. Getting started

DANGER! Place the toaster on a level and heat-resistant
surface. Place a heat-resistant board in between the surface
and the toaster if the surface itself is critical.
DANGER! Risk of getting burnt! When switched on, the
temperature of exposed surfaces may be very high. Only
touch the controls of the toaster.
DANGER! There is a risk of burning if standard sliced bread
is not used. Because of the smaller size or the shape, there is
a risk of touching hot parts when removing the toast.

7.1 Initial operation

•
Plug the mains plug into an easily accessible mains socket.
•
Adjust the control dial (7) to "6" (the highest setting).
•
Operate the toaster three times without any bread. To do this, push the start lever (3) down.
The indicator on the stop button (4) lights up while it is in use. When you use it for the first time,
smells or slight smoke may develop. This is normal and perfectly safe. Open a window to
ensure sufficient ventilation.

7.2 Toasting

Please note that different kinds of bread and the thickness and moisture of the slice can affect
the level of browning. It is best to store bread in its packaging. Normal sliced bread can burn if
the browning level is set too high. First, select a lower level of browning if possible.
Dry, light bread browns quicker than fresh or dark bread.
Do not use slices of bread which are too thick or too large. If a slice of bread gets stuck, remove
the mains plug from the mains socket and wait for the toaster to cool. If necessary, push the start
lever (3) up and remove the bread.
Set the control dial (7) a little lower if you are only using one toast slot (1).
•
Plug the mains plug into an easily accessible mains socket.
•
Set the level of browning you want on the control dial (7). You can set the browning level
steplessly from 1 (light) to 6 (dark).
SilverCrest STE 950 C1
English - 55