Specifications - Pioneer VSX-D512-S Manual De Instrucciones

10

Specifications

Amplifier Section
STEREO MODE
FRONT ......... 100 W + 100 W (DIN 1 kHz, 1.0 %, 8 Ω)
SURROUND MODE
FRONT ............ 100 W per channel (1 kHz, 1.0 %, 8 Ω)
CENTER ............................. 100 W (1 kHz, 1.0 %, 8 Ω)
SURROUND .... 100 W per channel (1 kHz, 1.0 %, 8 Ω)
Maximum Power (1 KHz, 10%, RMS, per channel driven)
................................................................. 120 W x 5
Input (Sensitivity/Impedance)
CD, VCR/DVR, CD-R/TAPE/MD, DVD/LD, TV/SAT
.......................................................... 200 mV/47 kΩ
Frequency Response
CD, VCR/DVR, CD-R/TAPE/MD, DVD/LD, TV/SAT
........................................... 5 Hz to 100,000 Hz dB
Output (Level/Impedance)
VCR/DVR REC, CD-R/TAPE/MD REC
......................................................... 200 mV/2.2 kΩ
Tone Control
BASS .................................................± 6 dB (100 Hz)
TREBLE ............................................. ± 6 dB (10 kHz)
LOUDNESS ............... +9 dB/+9 dB (100 Hz/10 kHz)
Signal-to-Noise Ratio (IHF , short circuited, A network)
CD, VCR/DVR, CD-R/TAPE/MD, DVD/LD, TV/SAT
....................................................................... 96 dB
Signal-to-Noise Ratio [EIA, at 1 W (1 kHz)]
CD, VCR/DVR, CD-R/TAPE/MD, DVD/LD, TV/SAT
....................................................................... 79 dB
Signal-to-Noise Ratio
[DIN (Continuous rated power output/50 mW)]
CD, VCR/DVR, CD-R/TAPE/MD, DVD/LD, TV/SAT
.............................................................. 88 dB/64 dB
VIDEO Section
Input (Sensitivity/Impedance)
VCR/DVR, DVD/LD, TV/SAT
.............................................................. 1 Vp-p/75 Ω
Output (Level/Impedance)
VCR/DVR ............................................... 1 Vp-p/75 Ω
Frequency Response
VCR/DVR, DVD/LD, TV/SAT → MONITOR
.................................................. 5 Hz to 7 MHz
Signal-to-Noise Ratio ............................................ 55 dB
Cross Talk ............................................................. 55 dB
FM Tuner Section
Frequency Range ....................... 87.5 MHz to 108 MHz
Usable Sensitivity
.......................... Mono:13.2 dBf, IHF (1.3 µV/ 75 Ω)
50 dB Quieting Sensitivity .................... Mono: 20.2 dBf
Signal-to-Noise Ratio ............... Mono: 73 dB (at 85 dBf)
Distortion .................................... Stereo: 0.5 % (1 kHz)
Alternate Channel Selectivity ............... 60 dB (400 kHz)
Stereo Separation ..................................... 40 dB (1 kHz)
78
Frequency Response ................ 30 Hz to 15 kHz (±1dB)
Antenna Input .................................... 75 Ω unbalanced
En/Sp/ChH En
+0
–3
+0 dB
–3
Stereo: 38.6 dBf
Stereo: 70 dB (at 85 dBf)
AM Tuner Section
Frequency Range .... 531 kHz to 1,602 kHz(9 kHz step)
......................... 530 kHz to 1,700 kHz(10 kHz step)
Sensitivity (IHF , Loop antenna) ...................... 350 µV/m
Selectivity ............................................................. 30 dB
Signal-to-Noise Ratio ............................................ 50 dB
Antenna ................................................... Loop antenna
Miscellaneous
Power Requirements
... AC 110/120-127/220/240 V (Switchable), 50/60 Hz
Power Consumption
Singapore/Malaysia models .............................. 250 W
All other models .............................................. 500 W
In Standby .............................................................. 1 W
Dimensions ............... 420 (W) x 158 (H) x 393 (D) mm
Weight (without package) .................................... 9.5 kg
Furnished Parts
AM loop antenna ......................................................... 1
FM wire antenna .......................................................... 1
Dry cell batteries (AA size IEC R6P) ............................. 2
J shape plug (VSX-D512-K only) ................................. 1
Power cord (not applicable to the Singapore and
Malaysia models) ...................................................... 2
Remote control ............................................................ 1
Operating instructions ................................................. 1
NOTE:
• Specifications and the design are subject to possible
modifications without notice, due to improvements.
Published by Pioneer Corporation.
Copyright © 2003 Pioneer Corporation.
All rights reserved.
Maintenance of External Surfaces
• Use a polishing cloth or dry cloth to wipe off dust
and dirt.
• When the surfaces are dirty, wipe with a soft cloth
dipped in some neutral cleanser diluted five or six
times with water, and wrung out well, and then wipe
again with a dry cloth. Do not use furniture wax or
cleaners.
• Never use thinners, benzine, insecticide sprays
or other chemicals on or near this unit, since these
will corrode the surfaces.