Radio; Starting Procedure; Storing The Strongest Broadcast Frequencies; Displaying The "Radio Settings" Screen - Pioneer AVH-X5750BT Manual De Instrucciones

Radio

Displays the preset channel list.
Select an item on the list ("1" to "6")
to switch to the preset channel.
Selects the FM1, FM2, FM3
or AM band.
6/10 21 48
1
Radio
2
FM1 AM
Abcdefghi
3
Abcdefghi
4
Abcdefghi
5
000.00
MHz
6
Performs manual tuning.
Performs seek tuning or
HOLD
non stop seek tuning.
Releasing the key in a few seconds, skips
to the nearest station from the current
frequency.
Keeping holding the key for a long
seconds, performs non stop seek tuning.
Recalls the preset channel
stored to a key from memory.
Stores the current broadcast
HOLD
frequency to a key.
Searches for a broadcast by PTY information.
Searching by PTY information on page 17
p By pressing or , you can also switch the preset
channels.
p By pressing and hold or and release, you can
also perform seek tuning.
p By keeping touching and holding or , you can
perform non stop seek tuning. Touch again to cancel.
< CRD4824-A >
17

Starting procedure

1 Display the "AV source selection" screen.
2 Touch [Radio].
The "Radio" screen appears.
Searching by PTY information
You can tune into a station using PTY (Program Type
Identification) information.
p This function is available when the FM tuner is selected.
1 Touch .
2 Touch or to select the item.
The following items are available:
News&Info (default), Popular, Classics, Others.
3 Touch to start searching.
If you touch [Cancel], the searching process is
canceled.
Storing the strongest broadcast
frequencies
The BSM (best stations memory) function automatically stores
the six strongest broadcast frequencies under the preset tuning
keys "1" to "6".
p Storing broadcast frequencies with BSM may replace those
you have already saved.
p Previously stored broadcast frequencies may remain stored
if the number of frequencies stored has not reached the
limit.
1 Touch .
2 Touch to begin a search.
While the message is displayed, the six strongest broadcast
frequencies will be stored under the preset tuning keys in order
of their signal strength.
If you touch [Cancel], the storage process is
canceled.
Displaying the "Radio settings"
screen
1 Press .
2 Touch , and then .
3 Touch [AV Source Settings].
4 Touch [Radio settings].
Tuning into strong frequencies
p You can use this function when "Radio" is selected as the
source.
Local seek tuning allows you to only tune into those radio sta-
tions with sufficiently strong signals.
1 Display the "Radio settings" screen.
Displaying the "Radio settings" screen on page 17
2 Touch [Local].
3 Touch the item you want to set.
Off (default):
●
Turns the seek tuning setting off.
Level1 to Level4:
●
Sets the level of sensitivity for FM to Level1 to Level4 (for
AM Level1 or Level2).
p The FM "Level4" (AM "Level2") setting allows reception of
only stations with the strongest signals.
Setting the FM or AM tuning
step
You can switch the tuning step for FM or AM band.
p For FM band, the seek tuning step is fixed to 50 kHz.
1 Turn the source off.
Source on the AV source selection screen on page 10
2 Display the "Radio settings" screen.
Displaying the "Radio settings" screen on page 17
3 Touch [FM Step] or [AM Step] to switch the
tuning step.
The following items are available for each setting:
FM Step
● 100 kHz(default)
● 50 kHz
AM Step
9 kHz (default)
●
● 10 kHz
17