Topping Up The Engine Oil Level - MV Agusta BRUTALE Serie Manual De Mantenimiento

1.5.1. Topping up the engine oil level

To top up the engine oil level, remove the oil filler
plug by using the 10 mm hexagonal bar supplied,
assembled on a proper key (see figure). Pour an
appropriate amount of engine oil of the recom-
mended type. Never exceed the MAX level mark.
At the end of the operation, place back the oil filler
plug.
WARNING
Before reassembling the oil filler plug,
grease its O-Ring by using AGIP Grease
30.
At last, perform the tightening of the oil
filler plug at the tightening torque of 35
Nm, by using a dynamometric key.
MAINTENANCE
CAUTION
To avoid clutch sliding and damage to
the engine, never add chemical addi-
tives to the engine oil, nor use an engine
oil different from the one specified in the
table at § 1.4. Make sure that no foreign
body gets in the crankcase while top-
ping up the engine oil.
- 17 -
Oil filler plug
1
1