Topping Up The Engine Oil Level - MV Agusta f4 1000 Manual De Mantenimiento

1.6.1. Topping up the engine oil level

Remove the oil filler plug by using the 10 mm
hexagonal bar supplied, assembled on a proper
key (see figure). Pour an appropriate amount of
engine oil of the recommended type. Never exceed
the MAX level mark. At the end of the operation,
place back the oil filler plug and reassemble the
right-hand side fairing.
WARNING
Before reassembling the oil filler plug,
grease its O-Ring by using AGIP Grease
30.
At last, perform the tightening of the oil
filler plug at the tightening torque of 35
Nm, by using a dynamometric key.
MAINTENANCE
CAUTION
To avoid clutch sliding and damage to
the engine, never add chemical addi-
tives to the engine oil, nor use an engine
oil different from the one specified in the
table at § 1.4. Make sure that no foreign
body gets in the crankcase while top-
ping up the engine oil.
- 19 -
1
1
Oil filler plug