Metabo HPT GP 10DL Manual De Instrucciones página 19

6. Machining
○ Place the rotating tip tool lightly against the
workpiece and machine the workpiece with
minimal pressure.
○ Rather than doing the whole task in a single
action, a better fi nish is achieved gradually by
multiple machinings.
NOTE
○ The grinder narrows toward the tip tool holder.
Place your fi nger on the narrow section and
hold the grinder for easy operation. (Fig. 10)
○ When machining a material for the fi rst time or
using the tip tool for the fi rst time, perform trial
grinding fi rst to check the optimal speed, how
to hold the grinder and how to place the tool
against the workpiece.
○ If you do not achieve the expected results,
applying more pressure to the power tool will
not give better results. Nor will the machining
performance be improved by tilting the power
tool. Adjust the rotating speed or change to
another tip tool.
English
Fig. 10
19