Space Cab/Super Space Cab - Dometic COOLAIR SP 950C Instrucciones De Montaje

Bastidor de fijación para daf 95/105/106 space cab/super space cab
Ocultar thumbs Ver también para COOLAIR SP 950C:
Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 14
CoolAir SP950C, SPX1200C
Fit the fastening frame and the condenser at the DAF 95/105/106
Space Cab/Super Space Cab as follows:
➤ Insert and tighten the four M8 x 30 bolts, eight U washers M8 8.4 x 16 mm and
four M8 retaining nuts (fig. 1, page 2) in the mounting frame for the condenser
unit.
➤ Insert the rubber damper on the back of the mounting frame.
➤ Take out the two existing M10 screws and M10 nuts (fig. 2 1 and 2, page 3).
➤ Attach the mounting frame with the ribbed bolts and retaining nuts provided:
– Two U washers M10 10.5 x 20 and two retaining nuts M10 (fig. 2 1, page 3)
– Two ribbed bolts M10 x 40 (fig. 2 2, page 3)
➤ Place the condenser unit on the projecting bolts of the mounting frame and bolt
to the four U washers M8 8.4 x 16 mm and four M8 retaining nuts.
➤ Check that all bolts are still tight after travelling approximately 200 km.
6
Guarantee
The statutory warranty period applies. If the product is defective, please contact the
service partner in your country (addresses on the back on the instruction manual).
Our experts will be happy to help you and will discuss the warranty process with you
in more detail.
EN
Guarantee
7

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

Coolair spx 1200c

Tabla de contenido