Bosch CM10GD Instrucciones De Funcionamiento Y Seguridad página 30

BM 2610027879 07-13_BM 2610027879 07-13.qxp 7/8/13 9:52 AM Page 30
long Workpiece Support
WARNING
clamped down and properly supported from
underneath.
Additional Workpiece Support
Blocks – Long pieces need extra support. The base
height (3-3/4") is designed to match the standard
lumber of two 2xs and one 1x. Boards of these
thicknesses can be used to create auxiliary support
extensions for long workpieces (see Figure 35).
Add Two 2xs
and One 1x
figure 35. Block Support
preparing for Saw Operations
Workpiece Support
long workpieces have
tendency to tip over unless
a
30.