Maximum Heart Rate (During Training); Power Supply (Fig. E) - Tunturi F40 Upright Bike Manual Del Usuario

heart rate transmitters, make sure that only one
person with a transmitter is within transmission
range.
NOTE
• Do not use a heart rate chest belt in combination
with the handpulse sensors.
• Always wear the heart rate chest belt under your
clothes directly in contact with your skin. Do
not wear the heart rate chest belt above your
clothes. If you wear the heart rate chest belt
above your clothes, there will be no signal.
• If you set a heart rate limit for your workout, an
alarm will sound when it is exceeded.
• The transmitter transmits the heart rate to the
console up to a distance of 1 metre. If the
electrodes are not moist, the heart rate will not
appear on the display.
• Some fibers in clothes (e.g. polyester, poly-
amide) create static electricity which can prevent
accurate heart rate measurement.
• Mobile phones, televisions and other electrical
appliances create an electromagnetic field which
can prevent accurate heart rate measurement.
Maximum heart rate
(during training)
The maximum heart rate is the highest heart rate a
person can safely achieve through exercise stress. The
following formula is used to calculate the average
maximum heart rate: 220 - AGE. The maximum heart
rate varies from person to person.
WARNING
• Make sure that you do not exceed your
maximum heart rate during your workout. If you
belong to a risk group, consult a physician.
Beginner
50-60% of maximum heart rate
Suitable for beginners, weight-watchers, convalescents
and persons who have not exercised for a long time.
Exercise at least three times a week, 30 minutes at a
time.
Advanced
60-70% of maximum heart rate
Suitable for persons who want to improve and maintain
fitness. Exercise at least three times a week, 30 minutes
at a time.
Expert
70-80% of maximum heart rate
Suitable for the fittest of persons who are used to long-
endurance workouts.
Use
Adjusting the support feet
The equipment is equipped with 4 support feet. If
the equipment is not stable, the support feet can be
adjusted.
1. Turn the support feet as required to put the
equipment in a stable position.
2. Tighten the locknuts to lock the support feet.
Adjusting the horizontal seat position
The horizontal seat position can be adjusted by setting
the seat to the required position.
- Loosen the seat adjustment knob.
- Move the seat to the required position.
- Tighten the seat adjustment knob.
Adjusting the vertical seat position
The vertical seat position can be adjusted by setting the
seat tube to the required position. With the leg almost
straight, the arch of the foot must touch the pedal at its
lowermost point.
- Loosen the seat tube adjustment knob.
- Move the seat tube to the required position.
- Tighten the seat tube adjustment knob.
Adjusting the handlebar
The handlebar can be adjusted according to the height
and the exercise position of the user.
- Loosen the handlebar adjustment knob.
- Move the handlebar to the required position.
- Tighten the handlebar adjustment knob.

Power supply (Fig. E)

The trainer is powered by an external power supply.
Refer to the illustration to locate the trainer power
input.
NOTE
• Connect the power supply with the trainer
before connecting it to the wall outlet.
• Always remove power cord when
• machine is not in use.
1 9
English