Names And Functions Of Each Part - Hitachi RAS-10NHZ4 Manual De Instrucciones

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

NAMES AND FUNCTIONS OF EACH PART

INDOOR UNIT
MODEL NAME AND DIMENSIONS
MODEL
RAS-10NHZ4(H)/RAS-14NHZ4(H)/RAS-18NHZ4(H)
MULTI-AIR CONDITIONER
With this multi-air conditioner, several indoor units can be connected to one outdoor unit to be driven. You can operate
the required number of indoor units.
Combination of Operations:
When operation mode is selected:
You cannot operate the indoor units in the
G
following combinations.
One unit
Heating
During automatic operation:
When heating operation is automatically selected for the first indoor unit, the next indoor unit will then start to heat.
G
Also, if cooling or dehumidifying is automatically selected for the first indoor unit, the next indoor unit will also start
to cool or dehumidify.
Adjusting the Number of Indoor Units:
Decrease the number of indoor
units to be operated especially
when it is very hot or cold or
when you want to reach the
present temperature quickly.
(EN1) RAS-10/14/18NHZ4(H)-1-15
WIDTH (mm)
Other unit
Cooling
Dehumidifying
Circulating (fan)
4
Air filter
To prevent dust from coming into the indoor unit.
(Refer page 21)
Front panel
Indoor unit indicators
Light indicator showing the operating condition.
(Refer page 5)
Horizontal deflector
G
Vertical deflector
(Air Outlet)
(Refer page 16)
Remote controller
Send out operation signal to the indoor unit. So as to
operate the whole unit.
(Refer page 6)
HEIGHT (mm)
860
285
The indoor unit which is switched on first continues to
G
operate, but other indoor units which is switched on later
does not operate while the lamp lights.
To re-start an indoor unit which was operated later, stop
G
the indoor unit which was operated first or later and reset
the type of operation, then perform operation again.
Stopped Indoor Units:
When an indoor unit is operated in the cooling,
heating or dehumidifying mode in the room, the
sound of refrigerant flow may be heard from a
stopped indoor unit or a stopped indoor unit may
become warm. This is because the indoor unit
returns refrigerant to the outdoor unit to be ready
for operation.
– 4 –
12/3/05, 12:36 PM
DEPTH (mm)
183

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

Ras-14nhz4Ras-18nhz4Ras-10nhz4hRas-14nhz4hRas-18nhz4h

Tabla de contenido