Routine And Planned Maintenance; Ordinary Maintenance; B - A Outer Cleaning (To Be Carried Out Every Day); B - B Fireproof Surface Cleaning (To Be Carried Out Every Day) - OEM MILLENIUM VALIDO Manual De Uso Y Mantenimiento

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

MILLENIUM VALIDO
Maintenance
Chapter 6

6.1 - ROUTINE AND PLANNED MAINTENANCE

6.1.a - In general
DANGER
All maintenance operations shall be car-
ried out when the oven is off and cool and
the cutout switch is disconnected, on "
" OFF position.
Maintenance operations have been subdivided into
three categories:
• ROUTINE MAINTENANCE:
Group all daily and weekly operations to be carried
out on the oven.
• PLANNED MAINTENANCE:
List all operations to be carried out at regular intervals
in order to ensure a good oven functioning.
• MAINTENANCE IN CASE OF NEED:
Some operations to be carried out in case of need,
for instance the replacement of broken or worn
components.
6.1.b - Ordinary maintenance
6.1.b.a - Outer cleaning (to be carried out every day)
At the end of each working cycle, carefully
clean the oven.
To clean the oven, NEITHER metallic objects
0
such as steel wool, brushes, scrapers NOR
corrosive products shall be used.
Do not utilize water jets to clean the oven
sides.
• To clean the outer side of the oven, you shall use a wet
cloth as well as a detergent suitable for the surface to
be treated.
6.1.b.b - Fireproof surface cleaning (to be carried
• Make sure the oven is totally cool, oepn the door and
clean the refractory surface (1) by the special scrubber.
FIG. 1
1
ATTENTION
out every day) (Fig 1)
EN - 31

Publicidad

Tabla de contenido
loading

Tabla de contenido