Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
Safety Notes
Gloves should be worn during installation to prevent
crushing and cutting injuries.
Do not allow the streams of the shower touch sensi-
tive body parts (such as your eyes). An adequate
distance must be kept between the shower and you.
The product may not be used as a holding handle. A
separate handle must be installed.
The shower system may only be used for bathing,
hygienic and body cleansing purposes.
The hot and cold supplies must be of equal pres-
sures.
Installation Instructions
•
The fitting must be installed, flushed and tested after
the valid norms.
•
Where the contractor mounts the product, he should
ensure that the entire area of the wall to which the
mounting plate is to be fitted, is flat (no projecting
joints or tiles sticking out), that the structure of the wall
is suitable for the installation of the product and has
no weak points. The enclosed screws and dowels are
only suitable for concrete. For another wall construc-
tions the manufacturer's indications of the dowel
manufacturer have to be taken into account.
•
The mesh washer must be insert to protect the over-
head shower against incoming dirt by pipework. In-
coming dirt leads to defects or/and can damage parts
of the shower; such caused faults voids all liability and
guarantee claims.
Technical Data
Operating pressure:
Recommended operating pressure:
Test pressure:
(1 MPa = 10 bar = 147 PSI)
Hot water temperature:
4
English
Symbol description
max. 0,6 MPa
0,1 - 0,4 MPa
1,6 MPa
max. 60°C
Assembly see page 32
Do not use silicone containing acetic acid!
Dimensions (see page 31)
Flow diagram (see page 31)
Operation (see page 34)
Cleaning (see page 35) enclosed
brochure
Spare parts (see page 37)
Special accessories
extension (10658000) order as an extra
Test certificate (see page 37)
Publicidad
Tabla de contenido
