Safety Notes; Technical Data; Symbol Description; Installation Instructions - Hansgrohe Axor Front 26021000 Modo De Empleo/Instrucciones De Montaje

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 6

Safety Notes

Gloves should be worn during installation to prevent
crushing and cutting injuries.
The shower system may only be used for bathing,
hygienic and body cleaning purposes.
Children as well as adults with physical, mental and/
or sensoric impairments must not use this shower
system without proper supervision. Persons under
the influence of alcohol or drugs are prohibited from
using this shower system.
Do not allow the streams of the shower touch sensi-
tive body parts (such as your eyes). An adequate
distance must be kept between the shower and you.
The arm of the shower head is intended only to hold
the shower head. Do not load it down with other
objects!

Installation Instructions

• The pipes and the fixture must be installed, flushed
and tested as per the applicable standards.
• The plumbing codes applicable in the respective
countries must be oberserved.
• Prior to installation, inspect the product for transport
damages. After it has been installed, no transport or
surface damage will be honoured.
• Where the contractor mounts the product, he should
ensure that the entire area of the wall to which the
mounting plate is to be fitted, is flat (no projecting
joints or tiles sticking out), that the structure of the wall
is suitable for the installation of the product and has
no weak points. The enclosed screws and dowels are
only suitable for concrete. For another wall construc-
tions the manufacturer's indications of the dowel
manufacturer have to be taken into account.
• Wall mount without basic kit see page 31. Wall mount
with basic kit see page 33.
Wall mount see page 31
Ceiling mount see page 36
4
English

Technical Data

Operating pressure:
Recommended operating pressure:
(1 MPa = 10 bar = 147 PSI)
Hot water temperature:
Thermal disinfection
The product is exclusively designed for drinking water!

Symbol description

Do not use silicone containing acetic acid!
Dimensions (see page 38)

Flow diagram

(see page 38)
Operation (see page 39)
Cleaning (see page 40 and en-
closed brochure)
Spare parts (see page 42)
Special accessories (order as an
extra)
basic kit #26909180
Test certificate (see page 44)
max. 70°C / 4 min
Rain
RainAir
max. 0,6 MPa
0,1 – 0,4 MPa
max. 60°C

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

Front 26022000

Tabla de contenido