DDIN head unit provisions
1. Attach the radio brackets to the
radio panel with the provided
(4) #8 x 3/8" Phillips screws.
(Figure A)
2. Mount the aftermarket radio to
the radio brackets/radio panel
assembly using the screws
supplied with the radio. (Figure B)
3. Locate the factory wiring harness
in the dash. Metra recommends
using the proper mating adapter
from Metra or AXXESS.
Re-connect the negative battery
terminal and test the unit for
proper operation.
4. Reassemble dash in reverse order
of disassembly.
Kit Assembly
(Figure A)
95-7354B
(Figure B)
3