R82 Cricket 1 Guia Del Usuario página 24

Transport in motor vehicles
This product is dynamically tested according to ISO 7176-19.
Warnings
The following instructions must be followed to maintain the safety
The approval is not valid on 'custom made' chairs
This product is approved for transporting the user in motor vehicles. Please look at
MEASUREMENT section of this manual for the max load. indication
The user should transfer to the vehicle seat and use the vehicle-installed restraint system
whenever possible
The product must be placed in a forward-facing position, when used as a seat in a motor
vehicle. Use an approved 4-point strap-type tiedown system according to ISO 10542-2
Use an approved 3-point belt according to ISO 10542-1 in the chair. Restraints should
not be held away from the body by chair components such as armrests or wheels. It is not
enough ONLY to use a hip belt
All accessories must be removed from the chair and secured separately in the vehicle.
Accessories which can not be removed, must be secured to the chair but positioned away
from the user with energy-absorbing padding placed between the accessories and the user
The product should be inspected by the dealer before reuse following involvement in any
type of vehicle collision
The instructions on how to prepare the seat and chair, must be carried through before
transportation
support.R82.org
ENGLISH
Restraints should
not be held away
from body by chair
components such
as armrests or
wheels
23
EN