Phone Connectivity Settings - Pioneer DMH-160BT Manual De Instrucciones

Menu Item Description
1
[Parking Assist Guide Adjusting the guidelines by dragging or touching
Adjust] / /
2
Touch [OK] to finish the settings.
Touch [Reset] to reset the settings.
CAUTION
• When adjusting the guidelines, park the vehicle in a safe place
and apply the parking brake; this setting is available only when
the vehicle is parked with the parking brake applied.
• Turn the vehicle off before getting out to place the markings.
• The range projected by the rear view camera is limited. Also, the
vehicle width and distance guidelines displayed on the rear view
camera image may differ from the actual vehicle width and
distance. (The guidelines are straight lines.)
• The image quality may deteriorate depending on the usage
environment, such as at night or in dark surroundings.
NOTES
• Use painter's tape or similar tape to place markings as shown
below before setting up the guidelines.
• Adjust the guidelines so that they overlay the tape markings as
closely as possible.
1.52 m (5 ft)
[Rear View Camera Adjust following menu, touch [+]/[-] to adjust.
Adjustment]
[Brightness] Adjust the black intensity.
[-10] to [+10]
[Contrast] Adjust the contrast.
[-10] to [+10]
[Color] Adjust the color saturation.
[-10] to [+10]
on the screen.
30 cm (1 ft)
25 cm (9-7/8 in.)
Markings
Markings
25 cm (9-7/8 in.)
Rear bumper
3.05 m
(10 ft)
Vehicle Longitudinal
6.1 m
Centerline
(20 ft)

Phone Connectivity Settings

/
The settings are not available when the USB storage device is connected.
Menu Item
[Priority of Connectivity]
[Android Auto] [Mirroring]
[Android Phone MSC]
Description
Select the function that is prioritized when your
smartphone (Android) is connected to the unit.
Set the USB connection mode for your smartphone
(Android) to MSC (Mass Storage Class).
23
En